|
Equipment - PU Timing Belt,Timing Belt,V-Belts,Flat Belts,Round Belts,endless,belt drives, Routhane Belts, Posi Drive Belts
|
Equipment (Timing Belts V Belts Flat Belts Round Belts endless belt drives Routhane Belts Posi Drive Belts)
|
|
Manual: Multifunctional Building MachineV-Belts,For building and cutting of raw edge V-belts,synchronous belts and poly-v belts, buildingand grinding of rubber sleeve, Controled by PLC and industrial touching screen with dynamic parameter display and fully automatic operation
|
Belt length: 500-2500mm
Building drum length: 1000mm
Cutting drum length: 1220mm
Cord laying pitch: 1-6mm
Cord tension: 10-80N
Error of cord tension:+or-2N
|
|
|
Manual: Grinding Machine For Poly-V Belts,For grinding poly-v belts.Controled by PLC and industrial touching screen with dynamic parameter disp.
|
Belt length:600-2500mm
Size of belts:PJ PK PL
Grinding width:max50mm
central power:11Kw
|
|
|
Manual: Grinding Machine For Synchronous Belts,For grinding synchronous belts,precision exactly,efficiency high. Controled by PLC and industrial touching screen with dynamic parameter disp.
|
Belt length:450-5000mm
Belt width:400-1000mm
Grinding precision:¡À0.1mm(in 1000mm)
|
|
|
Manual: Measuring Machine for Synchronous Belts,For measuring length and printing table of measuring data and it's error, Controlled by PLC and industrial controllingcomputer with dynamic parameter display and fully automatic operation
|
Belt length:500-2500mm
Measuring speed:120r/min
Measuring tension:20-800N
Measuring error:+or-0.05mm
|
|
|
Manual: Test Machine for V-belts,For testing tiredness of V-belts and poly-v belts.
|
Test power:15kW
Slip:max4%
Belt span. Tension:10-900N
Belt length:800-2500mm
RPM driving shaft:4700-4900r/min
|
|
|
Manual: Rubber Cover Vulcanized Po,For curing raw edge V-belts¡¢synchronous belts and poly-v belts.Controlled by PLC and industrial touching screen with dynamic parameter display and fully automatic operation. Opening¡¢closing and locking of door with hydraulic system.
|
Inside diameter:2000mm
Working pressure:1.4MPa
Working temperature:197.4¡æ
Maximum diameter of belts:1600mm
|
|
|
Manual: Stripper for Synchronous Belts,For stripping synchronous belts after being cured and ground.
|
Stripping range:%d150-760mm
Stripping speed: 2m/min
Working pressure:16MPa
|
|
|
Manual: Building Machine for V-Belts,For building raw edge V-belts,synchronous belts and poly-v belts,finishing operating such as cordlaying.rubber sheet building. etc.Controlled by PLC and industrial touching screen,and parameter is dynamic displayed.
|
Belt length: 500-2500mm
Cord laying speed:160m/min
Cord laying pitch:1-6mm/r
Cord tension:10-80N
Error of cord tension:+or-2N
|
|
|
Manual: Synchronous Belt Moulding Machine,For building synchronous belts V-belts and poly-v belts, finishing operating such as cord laying rubber sheet building.Controlled by PLC and industrial touching screen, and parameter is dynamic displayed.Dual position cord tension unit and four station rubber sheet let-off device.
|
Belt length: 2000 - 5000mm
Cord laying speed: 160 m/min
Cord laying pitch: 1 - 10 mm/r
Cord tension: 40 - 200N
Error of cord tension: +or-3N
|
|
|
|
|
